$75,000
Sternpicker 0123
{{ galleryProps.activeIndex + 1 }}/16
Condition:
Available Now
Hull Material:
Fiberglass
Boat Builder:
Roberts Marine
| BUILDER: Roberts, Whaleback YEAR: 1980
HULL CONSTRUCTION: Fiberglass w/soft chine, soft turn of bilge Length - 32' Beam – 11‘8” Depth – 6’4” Draft – 36” Gross –… |
| BUILDER: Roberts, Whaleback
YEAR: 1980
HULL CONSTRUCTION: Fiberglass w/soft chine, soft turn of bilge Length – 32′ Beam – 11‘8” Depth – 6’4” Draft – 36” Gross – 16T Net: 12T
CABIN/GALLEY:
BATHROOM: Not in use
ENGINE:
TANKS:
PUMPS:
STEERING:
ANCHOR GEAR:
DECK GEAR:
FLYING BRIDGE:
HATCHES:
UNDERWATER FITTINGS:
ELECTRICAL:
BATTERIES:
FIRE EXTINGUISHERS:
ELECTRONICS:
EMERGENCY EQUIPMENT:
PLACARDS:
MISCELLANEOUS:
GENERAL DESCRIPTION AND CONDITION: Vessel is of fiberglass construction – hull is fiberglass overlay, interior stringers are hand fiberglass overlay. There are (2) longitudinal and (6) transverse bulkhead frames including the transom. Longitudinal frames are 4”x4” inlaid timbers. Deck frames are transverse 2”x3” Douglas fir on 13” centers. Transom vertical frames are 2” x 2 ½” inlaid timbers. Engine foundation is 4”x4” inlaid stringers. There is a 4”x2” stiffener P/S mid-hull; 2” fiberglass spray rails are P/S bow at waterline; 14” raised bulwarks are P/S bow. Fiberglass 14” splash rails are around the aft work deck area. Vessel design is vee entry hull, tapering to a short full keel. There is a single hard chine and flat sides. The bow is with raked stem and pointed with a slight whale back. The stern is slightly curved, near vertical transom stern. Vessel layout is as follows: the anchor is on the forepeak, followed by the trunk cabin. Aft cabin are the main fish holds and the aluminum reel. The roller is on the stern. Vessel has a custom Roberts work deck; fish holds are insulated and plumbed for RSW. Vessel was re-wired in the late 90’s. Wheelhouse accommodates main steering station and galley in upper cabin, berths are forward. Interior has hd vinyl ceiling, mahogany trim, fo’c’sle walls are carpeted. Vessel is equipped with good deck gear and electronics. Vessel is neat, clean, well cared for and reflects good maintenance updating; bilge is free of oil.
|
|
Price: $75,000
NEW 2019 PAC West 7.5 RSW
Available for Additional $20,000
|
Sternpicker 0123
$75,000
Boat Builder:
Roberts Marine
Propulsion:
Propeller
Fuel Type:
Diesel
Length:
32 ft
Hull Material:
Fiberglass
Special Notes:
32' Roberts Marine, Volvo Penta TAMD 70E, Twin Disc, ALL NEW Hydraulics, NEW Hydraulic Tank, NEW Hydraulic Pumps, NEW Valves, Maritime Fab Power Roller, KEM Drive Articulating Reel W/Auto Levelwind, Humminbird Sounder, & More.*NOTE: NEW 2019 PAC West 7.5 Ton RSW Available for Additional $20,000.
Contact Margaret Arvidson
Contact Margaret Arvidson for more information:
Contact Info:
- Broker: Margaret Arvidson
-
710 Third Street
P.O. Box 1722
Cordova, AK 99574 - Cell: 907.202.0012
- Local: 907.424.5335
- Email: info@crboats-permits.com
Copper River Boats & Permits LLC is acting as a broker and simply posting information provided to us by sellers. Our brokers have not inspected any of the items listed on the website. As such, we do not warrant the condition of any vessel, gear, equipment, or crew member listed on our site. All buyers must do their own due diligence and inspect the item being purchased. Buyer Beware. We provide no warranties express or implied.
Stay Up to Date!
Subscribe to our newsletter today!
Navigation:
Important Disclaimer: Copper River Boats & Permits LLC is acting as a broker and simply posting information provided to us by sellers. Our brokers have not inspected any of the items listed on the website. As such, we do not warrant the condition of any vessel, gear, equipment, or crew member listed on our site. All buyers must do their own due diligence and inspect the item being purchased. Buyer Beware. We provide no warranties express or implied.
Copyright (c) 2021. Copper River Boats & Permits, LLC. All Rights Reserved.
